Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-1274 - KIT DEV STANDARD RCM5700
Contact us: [email protected] Website: www.integrated-circuit.com
MiniCore RCM5700/RCM6700 User’s Manual
digi.com
91
The following options require more care in address selection and testing actions, as conflicts
with other users, servers and systems can occur:
LAN —
Connect the Interface Board’s Ethernet port to an existing LAN, preferably one
to which the development PC is already connected. You will need to obtain IP addressing
information from your network administrator.
WAN —
The RCM5700/RCM6700 is capable of direct connection to the Internet and
other Wide Area Networks, but exceptional care should be used with IP address settings
and all network-related programming and development. We recommend that development
and debugging be done on a local network before connecting a Rabbit-based system to the
Internet.
NOTE:
Checking and debugging the initial setup on a micro-LAN is recommended before
connecting the system to a LAN or WAN.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
3. Apply Power
The MiniCore module and Interface Board are now ready to be used.
92 / 113
92 / 113
