Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-1274 - KIT DEV STANDARD RCM5700
Contact us: [email protected] Website: www.integrated-circuit.com
MiniCore RCM5700/RCM6700 User’s Manual
digi.com
54
Table A-5. Standoff Heights Based on mini PCI Express Connector
mini PCI Express Connector
Height
Standoff Height
Remarks
6.8 mm
4.4 mm
Used with Interface Board
9.2 mm
6.2 mm
Used with Accessory Kit
The SMT connectors are ideal in a development environment, where the latch connector facili-
tates swapping MiniCore modules as development progresses. The absence of holes also maxi-
mizes trace routing flexibility on the printed circuit board. The standoff option offers better
vibration resistance and grounding once you are ready to deploy your application based on the
RCM5700/RCM6700.
The Rabbit store sells an accessory kit (Part No. 101-1306) with the standoffs, screws, and mini
PCI Express connector needed to mount an MiniCore module using the footprint shown in Figure
A-4. The heights of the mini PCI Express connector and the associated standoffs in the accessory
kit are shown in millimeters at right.
A.2 Rabbit 5000 and 6000 Microprocessor Characteristics
The
Rabbit 5000 Microprocessor User’s Manual
and
Rabbit 6000 Microprocessor User's Man-
ual
, which are included with the online documentation, provide complete specifications and tim-
ing diagrams for the Rabbit 5000 and 6000 microprocessors.
Rabbit’s Technical Note TN227,
Interfacing External I/O with Rabbit Microprocessor Designs
,
which is also included with the online documentation, contains suggestions for interfacing I/O
devices to the Rabbit 5000/6000 microprocessors.
55 / 113
55 / 113
