Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-1274 - KIT DEV STANDARD RCM5700
Contact us: [email protected] Website: www.integrated-circuit.com
MiniCore RCM5700/RCM6700 User’s Manual
digi.com
71
C.2.1 Headers
The Prototyping Board has a header socket at J2 for physical connection to other boards above it,
and a header socket at J12 on the bottom side to connect to boards below it. J2 and J12 are 2 × 25
SMT header sockets with a 0.1" pin spacing. Figure C-3 shows the layout of another board to be
plugged into the Interface Board — this footprint is identical for the Prototyping Board and the
two accessory boards. The values are relative to the mounting hole.
Figure C-3. MiniCore Boards Footprint
(All measurements are in inches followed by millimeters enclosed in parentheses.)
72 / 113
72 / 113
