HC5-10
15 / 34
User Manual
Rev. 1.0 - 26/03/04
When the value for a parameter is not available for such reasons, it's substituted with
the symbol “==”.
At power on, the LCD display will show the following presentation screen, indicating
the name of the device and informations regards the actual release software (SW)
and hardware (HW):
After a few seconds, the main screen will be displayed, reporting the values od
Forward power and Reflected power:
The management software will remain indefinitely in this default screen, until the user
pushes the ESC button.
Pushing the ESC button, the user will be presented with the menu selection screen,
from which the other screens can be accessed:
Pushing again the ESC button, the software goes back to the default screen.
To enter into one of the submenus, just select the corresponding name (that will be
indicated by a flashing underscore) with the LEFT and RIGHT buttons, and then push
ENTER.
5.3.1
Function menu (Fnc)
From this menu, the user can “switch” ON and OFF the hybrid coupler.
