HC5-10
21 / 34
User Manual
Rev. 1.0 - 26/03/04
6. Controls, Indicators and Connectors
This chapter describes the front and rear panels of the HC5-10, with a brief indication
of all the different components.
6.1
Front Panel
[1] ESC
Button to exit from a menu.
[2] LOC/REM
Switch to select the local or remote control modes.
[3] ALARM RESET
Button used to manually reset the protection system (also for the amplifiers,
in the case is correctly connected).
[4] DISPLAY
LCD Display.
[5] ON
Green LED, lit when the hybrid coupler is switched on.
[6] WAIT
Yellow LED indicating that the hybrid coupler is waiting for a condition that
is blocking the power output to be removed.
[7] FAULT
Red LED indicating that a fault that cannot be automatically reverted.
[8] LOCAL
Yellow LED indicating that the hybrid coupler in local control mode.
[9] OVER
Yellow LED, lit when the system have reached the maximum delivery
power.
[10] BRIGHTNESS
Trimmer to regulate the brightness of the LCD display.
[11] ENTER
Button used to accept a parameter's value or to enter into a menu.
[12] RIGHT/DOWN
Button used to navigate in the menu system and to modify the changeable
parameters.
[13] LEFT/UP
Button used to navigate in the menu system and to modify the changeable
parameters.
[14] R.F. TEST
BNC RF monitor output. The output level is -60 dB below the power
output in the band 87.5-108 MHz.
[15] AIR FILTER
Air Filter for Power Splitter and Combiner.
[16] FAULT
Red LED indicating the presence of a malfunction that could not be resolved
automatically after the "RETRY" attempts set up.
