![background image](http://html1.mh-extra.com/html/r-biopharm/rida-qline-autoblot/rida-qline-autoblot_user-manual_3079959023.webp)
23
Figure 9 illustrates the positioning of all the accessories on the deck of the instrument.
Further notes on the assembly and placement of the accessories can be found below.
Accessory I. Priming Trough
Position on the dimples in front of the pump assembly. There is only one way in which it
can fit.
Accessory II. Sample Carousel
Align the protruding cylinders with the matching holes in the centre ring of the carousel
frame.
Accessory III. Reagent Bottle Holder
Position on the dimples in front of the tray table. There is only one way in which it can fit.
Accessory IV. Tip Rack Holder
Position on the dimples to the right of the priming trough. There is only one way in which
it can fit.
Accessory V. Waste Tip Trough
Position on the dimples to the right of the reagent bottle holder. There is only one way in
which it can fit.
Accessory VI. Waste Bottle Holder
Position on the dimples to the right of the tip waste trough. There is only one way in
which it can fit.
Accessory VII. Waste Bottle and Lid
Position the bottle into the holder and place the white lid onto the bottle. Connect the
tubing from the waste pump.
Accessory VIII. Wash Bottle Holder
Position on the dimples to the left of the carousel. There is only one way in which it can fit.