33
7 Assay processing
7.1 Creating a Worklist
Upon connecting to the instrument and
performing successful calibration scans, the
environment is set for using the instrument
for strip processing and analysis. From the
main menu
and within the
worklists
tab,
the option called ‘Start Worklist’ takes the
user to the menu from which they can
select a work-list to run.
On a new instrument, the screen that the
user will see is included in Figure 20, which
states that there are no known work-lists
for the user to choose from.
In order to populate this menu with
work-lists, the user must first create new
work-lists within RIDA qLine® Soft and
then forward the details to the instrument.
This section will cover how this can be
achieved.
If the user returns to the ‘Start Worklist’
menu that was detailed at the beginning
of this section, a single entry should now
be visible in a list called ‘Pending Worklists’,
as shown in Figure 21.
Figure 20:
The work-list selection menu
when no work-list entries have been sent
Figure 21:
The ‘start worklist’ menu
which contains a single entry that was
received from the B4C software
