30
RIDA qLine® autoBlot | User manual
For users unfamiliar with the IP address ranges and need assistance determining which
1 of the 2 addresses represents their network, the following guidelines apply:
The addresses of private networks typically come in number ranges similar to some of the
following:
•
10.0.0.0
•
172.16.0.0
•
192.168.0.0
The addresses of Ethernet ports which don’t have a network connection will typically start
with 168 or 169
The port will always be 8000, this is donated by the value which follows the colon (:)
character after the IP address. The IP address and port number should be recorded for
later use.
6.3 Connecting to the instrument to RIDA qLine® Soft
6.3.1 Device settings for RIDA qLine® Soft
For use with RIDA qLine® Soft the data for RIDA qLine® autoBlot must be entered during
the installation of RIDA qLine® Soft and RIDA qLine® autoBlot will be automatically selected
as the device type in the program.
In addition to RIDA qLine® Soft, the RLink_AutoBlot.exe program will be copied into the
directory C:\Program Files (x86)\R-Biopharm\qLine. It is recommended to create a
shortcut to this file on the desktop since the RLink_autoBlot program does not start
automatically, but is needed to connect to the RIDA qLine® autoBlot. The RIDA qLine®
autoBlot must first be switched on, and then the RLink program must be started.
