Qwizdom Actionpoint User Guide
19
Qwizdom Actionpoint 2007
not activate. You must present the slides by clicking on the
Presentation
button
to use the
Qwizdom
remotes.
7. Have the participants turn on their remotes.
8. Either the answer choices or a blank screen appears on the remote, depending on
the question type.
Here are a few things you may execute during presentation:
·
Display the response chart by pressing the / key
·
Display the private graph by pressing the zero key
·
Randomly call upon a participant by pressing the Pick key
9. Go through the presentation until all the question slides are answered.
10. When you are unable to advance to the next slide, this means the presentation is
done. Press the circle key in the thumb pad to stop the presentation (screen will go
black) and press it again to exit back to
PowerPoint
.
6.1.1
Presentation Setup
There are many options you can apply to your presentation. Not all options will be
applicable.
General
tab:
Send Right/Wrong Feedback to Remotes after answering
-remotes will receive a
check
mark
if answer is correct and an
X
if answer is incorrect. Remotes will receive both a
check mark
and
X
if feedback is turned off to indicate that the response has been
received.
Allow participants to change answer
-checking this option allows participants to
change their answer for the question slide they are on.
Override Points Value with Global Point value of "xxx" points
-enter the new amount
of points that will be applied to the slide temporarily for that presentation.
Timer
-you can select no timer, use the time set within the slides, and global timer by
entering the number of seconds for all slides in the presentation.