Getting Started
4
Qwizdom Actionpoint 2007
2.3
Hardware Setup
1.
Plug the USB cable into the RF Host and then plug the other end of the USB cable
into an open USB port.
2.
Place two AA batteries (provided in the remote set) and insert the screw (optional)
into the back of the Q4 RF remote to secure the battery compartment. Plug the Q5
RF participant and Q5 RF instructor remotes into the multi-charger and/or single
charger for 24 hours before first use.
Installing USB Drivers on Vista
You will need to do this procedure twice (
because there are two drivers
).
1.
Insert the
Qwizdom Actionpoint
disc into the computer and make sure the host is
plugged in properly.
2.
From the
Start
menu, go to the
Control Panel
.
3.
Click on
Hardware and Sound
.
4.
Click on
Device Manager
.
5.
Select the option
View Devices by Type
under the
View
menu.
6
.
Qwizdom RF Host
should be located under
Universal Serial Bus Controllers
,
Ports
and
Unknown
or
Other Devices
.
7.
When you find it, double-click on it and click on the
Driver
tab.
8.
Click on the button that says
Update Driver
. The installation wizard will appear.
9.
Select "
Browse Computer for Software Driver
" and click
Next
.
10. Click on the
Browse
button. A window appears.
11. Click on
My Computer
, click on the drive that
Qwizdom Actionpoint
is in, and then
find the folder that says
USB_Drivers
.
12. Click
OK
and then
Next.
13. When it's done installing, click on
Close.
Repeat the above steps once more and
then restart your computer.
Installing USB Drivers on Windows 2000/XP
You will need to do this procedure twice (
because there are two drivers
).
1.
Insert the
Qwizdom Actionpoint
disc into the computer and make sure the host is
plugged in properly.
2.
From the
Start
menu, go to the
Control Panel
or go to
Settings
and then
Control
Panel
.
3.
Double-click on the
System
icon and click on the
Hardware
tab.
4.
Click on the
Device Manager
button.
5.
Select the option
View Devices by Type
under the
View
menu.
6.
Qwizdom RF Host or Qwizdom USB Base
should be located under
Universal Serial Bus
Controllers
,
Ports
and
Unknown
or
Other Devices
.
7.
When you find it, double-click on it and click on the
Driver
tab.
8.
Click on the button that says
Update Driver
. The installation wizard will appear.
9.
Select "
Install from a list or specific location
" and click
Next
.
10. Select "
Search for the best driver in these locations
" and check the "
Search removable
