Instruction book
2012 2039 28
76
The next item is “General”
. Using scroll keys select general and press the Enter key. Following window
appears:
Here, under “operation mode”, there are three options. They are Local, Remote and LAN control.
If only one compressor is needed to run in a different way than the others connected in a network then Local
control should be chosen as the operation mode for that respective compressor. The Master control in the
network has to be set to Local Control.
If “LAN control” is chosen then all the slave compressors will follow the master settings.
For “Remote control” it’s similar to LAN control but to activate Remote start/stop, we need to run the
compressors at Remote control.
Re
mote start/stop under “General” section can only be selected if that option was chosen before installing the
software in the Q-Control and needs the machine to be running in the Remote control mode. The last option is
‘’Critical Application” and this one is not going to be used on our standard products.
Next item is “Action Scheme” . Using scroll keys select action scheme and press the Enter key. Following
window appears:
Summary of Contents for QGV 40
Page 2: ......
Page 16: ...Instruction book 2012 2039 28 16 Main components Main components...
Page 128: ...Instruction book 2012 2039 28 128 Appendix 1 Product Analysis Report...
Page 131: ......
