background image

11

1-888-QUIETCOOL

5. 

Then, tie the black wire from the power source to the black wire from the timer. 

6. 

Lastly, tie the copper ground wire from the power source to the copper ground wire from the timer.

4. SYSTEM OPERATING INSTRUCTIONS

4.1  QuietCool Smart Attic Fan

QuietCool Attic Fans work almost everywhere, almost anytime. During the summer, an attic can be 40-50 
degrees hotter than the outside temperature, which in turn heats up the house much faster. With an attic fan, 
you can cool the attic to the same temperature as it is outside, greatly reducing the house from heating as 
quickly.

With the QuietCool Smart Attic Fan, gone are the days of having to adjust the thermostat for your attic fan. 
Featuring a built-in thermostat and humidistat, the self-adjusting, 10-speed ECM motor is always reading the 
temperature and humidity in the attic. 

When the fan detects temperature over 80 degrees, or humidity over 60%, the Smart Attic Fan comes on at the 
lowest speed. As the attic starts to heat up, the Smart Attic Fan automatically adjusts it’s speed. 

Temp.

80°

85°

90°

95°

100°

105°

110°

115°

120°

125°+

Humidity

60%+

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Speed

1

2

3

4

5

6

7

8

9

10

CFM

963

1343

1513

1641

1841

2014

2119

2356

2500

2830

Watts

15

18

25

34

49

60

79

99

117

145

*All specs are approximate. For the most up-to-date specs, please visit QuietCoolSystems.com

Figure 3.3A

Ground the fan to the junction box 

using the green ground screw

Specialty Series Fan

Junction

Box

Power

Source

14-2 Wire

14-2 Wire

8 HOUR

4 HOUR

2 HOUR

1 HOUR

HOLD

Bare Copper Wires Tied 

Together

Match Wire

Colors Together

14-3 W

ire

ADVANCED ATTIC GABLE FANS

®

Ground the fan to the junction box 

using the green ground screw

Specialty Series Fan

Junction

Box

Power

Source

14-2 Wire

14-2 Wire

8 HOUR

4 HOUR

2 HOUR

1 HOUR

HOLD

Bare Copper Wires Tied 

Together

Match Wire

Colors Together

14-3 W

ire

ADVANCED ATTIC GABLE FANS

®

Summary of Contents for AFG SMT-3.0

















Reviews: