QuickLabel Systems QLS-4100, Operation & Setup Manual

Page: 48 / 215

4-4 Keypad controls and menus
Menu Overview
The following list outlines all of the menus that are accessible via the user
interface. Some menus, as noted, are only accessible when the printer has
been paused using the PRINT/PAUSE key. Some menus, like the Cutter
menus, are only available when a specific option is enabled or in use.
The menus are organized in two levels. Top-level menus include Adjust, Cal
& Setup, Operation, Ribbon, Communications, System, and Options. By
choosing a top-level menu and pressing the SELECT key, you can scroll
though functions related to the top-level menu. Pressing the SELECT key
twice returns you to the top-level menu.
Note: For a detailed illustration of the printer menu structure, refer to
Appendix G: Menu structure .
Ready State &
Adjust Menu Options are available in a Ready or Pause state.
Intensity Adjusts the printhead intensity. Possible values
range from 1 – 32.
Speed Adjusts the print speed. Possible values range from
2 – 7 inches per second.
Print Line Adj Adjusts the print line for printheads 1 - 3. Possible
values range from -240 to +240.
Cross Web Adj Adjusts the cross web for printheads 1 – 4. Possible
values range from <-16 to -> 16 dots.
Vertical Offset Adjusts the print registration vertically. Possible
values range from -1200 to +1200 dots.
Horizontal Offset Adjusts the print registration horizontally. Possible
values range from <-1200 to -> 1200 dots.
Display Cntrs Adjusts the display of the label counter. Possible
values are Off, Batch, or Total.
Cut Offset Available if cutter is enabled. Adjusts the position
of the cut line. Possible values range from -1200 to
+1200 dots.