manualshive.com logo in svg

QuickLabel Systems QLS-4100, Operation & Setup Manual, Page: 95 / 215

Share
Download
QuickLabel Systems QLS-4100 Operation & Setup Manual Download Page 95

QLS-4100 Xe 

4-51 

Front Panel Lock/Unlock 

The Front Panel Lock/Unlock feature allows you to lock the menu, 
preventing unauthorized users from modifying printer settings. The front 
panel is locked and unlocked with a user-defined four-digit password. 

When the front panel is locked, users can scroll through the menus, but 
cannot make any changes. The only available features are PRINT/PAUSE, 
FORM FEED/ADVANCE, Printer Settings, and Front Panel Unlock. 

An “X” character will appear on the Ready and Pause displays to indicate 
the front panel is locked. 

 

 

To lock the front panel: 

1

 

If the printer is in a Ready state, press the PRINT/PAUSE key to pause 
the printer. 

2

 

Press the NEXT or PREVIOUS key until the System menu is displayed. 
Then press the SELECT key. 

 

3

 

Press the NEXT or PREVIOUS key until the Front Panel Lock menu is 
displayed. 

 

Front Panel Lock 

0000 

Pause: System 

Press SELECT 

Pause                               X 

Ready                               X 

Summary of Contents for QLS-4100
























































































































































































































Reviews:

No comments