Section 1 – Frame Assembly
Parts List
Frame Set Bag
Main Frames X 2
Rear Sub-frame x 2
Landing gear x 2
Bag 1
Main-shaft Bearing Block X 2
Canopy Standoffs x 4
Motor Mount x 1
Frame Rails x 2
26mm Landing Gear Standoffs x 4
Antirotation Base x 1
Assemble the main frames as shown in Figure 1. Open part is the bearing block opening that the bearing was inserted into.
Describe which is up or down, a sticker or indent or mark to designate the top part of the bearing block. You may not need the
washers that HHI sells as you want to keep the weight down
9
