Seesaw to Hiller Arm
Use a double link on this spot.
Assemble the push rod guides.
There are three pieces the main
clip and two inner sleeves.
Simply slide the two sleeves
into each other and then into the
main clip and glue. Putting
electrical tape onto the boom
before gluing is good, so it is
possible to reuse the clip later.
(HHI2900 – Rod Guides)
Install the carbon rudder control
rod. The rod should end up 22”
or 558mm long from ball to
ball. Slide the carbon rod
through the guides and glue the
ends on. Screw the links onto
the ends and attach to the balls.
29
