Attach the antirotation upright piece
to the antirotation base using (2)
M3x6 cap head screws.
Attach the antirotation guide using
(4) M3x6 cap head screws and (4)
M3 washer.
When installing the antirotation
guide, do not tighten at first until after
the swash is installed.
Assemble the rear sub-frame as
shown. Attach the two frame halves
with the boom holders. They will be
attached using (4) M3x35 cap head
bolts and nuts.
Remove the two boom holders from
the bag with the tail rotor parts.
11
