Section 3 – Counter Gear Assembly
Parts List
Bag 3
Counter Gear Shaft x 1
Counter Gear x 1
Lock Pin x 1
E-Clip x 1
Counter Gear Bearing Block x 2
Pulley Gear Plate x 1
Lock Pin x 1
Pulley Gear x 1
E-Clip x 1
M3x6 Cap Head Screw x 8
M3 Washer x 8
Install the steel stopper pin into the
counter gear shaft. Then slide the
counter gear onto the counter gear
shaft.
Secure the gear in place using an E-
clip.
Locate the two counter gear bearing
blocks. Next slide each bearing block
onto the counter gear shaft. Each
bearing block has an open face. The
open faces should both face up as
shown in the picture.
15
