background image

DL1300 Appliance

Configuring an Email server and Email notification template

29

Port
Enter a port number. It is used to identify the port for the email server; for example, the port 587 for Gmail.
The default is 25.
Timeout (seconds)
To specify how long to try a connection before timing out, enter an integer value. It is used to establish the

time in seconds when trying to connect to the email server before a time-out occurs.
The default is 30 seconds.
TLS
Select this option if the mail server uses a secure connection such as Transport Layer Security (TLS) or

Secure Sockets Layer (SSL).
Username
Enter a user name for the email server.
Password
Enter a password for accessing the email server.
From
Enter a return email address. It is used to specify the return email address for the email notification template;

for example, [email protected].
Email Subject
Enter a subject for the email template. It is used to define the subject of the email notification template; for

example, 

<hostname> - <level> <name>

.

Email
Enter information for the body of the template that describes the event, when it occurred, and the severity.

5. Click Send Test Email and review the results.
6. After you are satisfied with the results of the tests, click OK.

Parent topic  

Summary of Contents for DL1300


























































Reviews: