Quest Engineering DL1300 Page 17 Deployment Manual Download

Page: 17 / 57

DL1300 Appliance

Configuring the network interface

A page to change the administrator password is displayed.

3. Click OK on the message that prompts you to change the administrator password.
4. Enter and confirm the new password.

A message prompts you confirming that the password is changed.

5. Click OK.
6. From the

Dell readme.htm

screen, scroll down and click Proceed.

After entering the password, Press Ctrl+Alt+Delete to Sign in screen is displayed.

7. Log on using the changed administrator password.

The Select the language for AppAssure Appliance screen is displayed.

8. Select the language for your appliance from the list of supported languages.

The EULA screen is displayed.

9. To accept the EULA, click Accept EULA button.

NOTE:

You can run the AppAssure Appliance Configuration Wizard further only if you accept the

EULA. Otherwise, the appliance will log you off immediately.

The AppAssure Appliance Configuration wizard welcome screen is displayed.

NOTE:

The AppAssure Appliance Configuration wizard may take up to 30 seconds to display on the

system console.

Parent topic

AppAssure Appliance Configuration Wizard

CAUTION:

Make sure you complete all the steps of AppAssure Appliance Configuration Wizard before

performing any other task or change any settings on the Appliance. Do not make any changes through

the Control Panel, use Microsoft Windows Update, update AppAssure software or install licenses, until the

wizard is complete. The Windows update service is disabled temporarily during the configuration process.

Exiting the AppAssure Appliance Configuration Wizard before it is complete may cause errors in system

operation.

The AppAssure Appliance Configuration wizard guides you through the following steps to configure the software

on the appliance:

•

Configuring the network Interface

•

Configuring host name and domain settings

•

Configuring SNMP settings

On completing the installation using the wizard, the Core Console launches automatically.

Parent topic

Configuring the network interface

To configure the available network interfaces:

1. On the AppAssure Appliance Configuration Wizard Welcome screen, click Next.

Summary of Contents for DL1300


























































Search results

Summary of Contents for DL1300

Reviews:

Related manuals for DL1300

Brands by name

Popular brands

Quest Engineering DL1300, Deployment Manual

Search results

Summary of Contents for DL1300

Reviews:

Related manuals for DL1300

Brands by name

Popular brands