DL1300 Appliance
Configuring SNMP settings
19
By default, Yes is selected.
3. If you want to connect your appliance to a domain, enter the following details:
◦
Domain name
◦
Domain user name
NOTE:
The domain user must have local administrative rights.
◦
Domain user password
4. Click Next.
NOTE:
Changing the host name or the domain requires restarting the machine. After restarting, the
AppAssure Appliance Configuration wizard is launched automatically. If the appliance is connected to
a domain, after restarting the machine, you must log in as a domain user with administrative privileges
on the appliance.
The Configure SNMP Settings page is displayed.
Parent topic
Configuring SNMP settings
Simple Network Management Protocol (SNMP) is a commonly used network management protocol that allows
SNMP-compatible management functions such as device discovery, monitoring, and event generation. SNMP
provides network management of the TCP/IP protocol.
To configure SNMP alerts for the appliance:
1. On the Configure SNMP Settings page, select Configure SNMP on this appliance.
NOTE:
Deselect Configure SNMP on this appliance if you do not want to set up SNMP details and
alerts on the appliance and skip to step 6.
2. In Communities, enter one or more SNMP community names.
Use commas to separate multiple community names.
3. In Accept SNMP packets from these hosts, enter the names of hosts with which the appliance can
communicate.
Separate the host names with commas, or leave it blank to allow communication with all hosts.
4. To configure SNMP alerts, enter the Community Name and the Trap destinations for the SNMP alerts and
click Add.
Repeat this step to add more SNMP addresses.
5. To remove a configured SNMP address, in Configured SNMP addresses, select the appropriate SNMP
address and click Remove.
6. Click Next.
The Thank You page is displayed.
7. To complete the configuration, click Next.
8. Click Exit on the Configuration Complete page.
The Core console opens on your default web browser.
Parent topic
