Quectel AF50T Hardware Design Download Page 50

Page: 50 / 55

Wi-Fi&BT Module Series

AF50T Hardware Design

AF50T_Hardware_Design 49 / 52

Table 31: Recommended Thermal Profile Parameters

1. During manufacturing and soldering, or any other processes that may contact the module directly,

NEVER wipe the module’s shielding can with organic solvents, such as acetone, ethyl alcohol,

isopropyl alcohol, trichloroethylene, etc. Otherwise, the shielding can may become rusted.

2. The shielding can for the module is made of Cupro-Nickel base material. It is tested that after 12

hours’ Neutral Salt Spray test, the laser engraved label information on the shielding can is still clearly

identifiable and the QR code is still readable, although white rust may be found.

3. If a conformal coating is necessary for the module, do NOT use any coating material that may

chemically react with the PCB or shielding cover, and prevent the coating material from flowing into

the module.

6.3. Packaging

AF50T module is packaged in a vacuum-sealed bag which is ESD protected. The bag should not be

opened until the devices are ready to be soldered onto the application.

AF50T is packaged in tape and reel carriers.

Factor

Recommendation

Soak Zone

Max slope

1–3 °C/s

Soak time (between A and B: 150 °C and 200 °C)

70–120 s

Reflow Zone

Max slope

2–3 °C/s

Reflow time (D: over 220 °C)

45–70 s

Max temperature

238 °C to 246 °C

Cooling down slope

-1.5 to -3 °C/s

Reflow Cycle

Max reflow cycle

NOTES

Summary of Contents for AF50T
























































Search results

Summary of Contents for AF50T

Reviews:

Related manuals for AF50T

Brands by name

Popular brands

Quectel AF50T, Hardware Design

Search results

Summary of Contents for AF50T

Reviews:

Related manuals for AF50T

Brands by name

Popular brands