Quectel AF50T Hardware Design Download Page 11

Page: 11 / 55

Wi-Fi&BT Module Series

AF50T Hardware Design

AF50T_Hardware_Design 10 / 52

Product Concept

2.1. General Description

AF50T is an automotive grade Wi-Fi and Bluetooth (BT) module with low power consumption. It is a

single-die WLAN (Wireless Local Area Network) and BT combo solution supporting IEEE 802.11

a/b/g/n/ac/ax 2.4/5 GHz WLAN standards and BT5.1 standard, which enables seamless integration of

WLAN and BT Low Energy technologies.

AF50T supports a low-power PCIe Gen 2 interface for WLAN and a UART/PCM interface for BT, and also

supports LTE & WLAN/BT coexistence interface. It is designed to be used in conjunction with Quectel 5G

V2X module AG55xQ series to provide it with WLAN and BT functions.

2.2. Key Features

The following table describes the key features of AF50T module.

Table 1: Key Features

Features

Details

Power Supply

Core supply voltage: 0.95 V, 1.35 V, 1.9 V

I/O supply voltage: 1.8 V

RF supply voltage: 3.85 V

Operating Frequency



2.4 GHz WLAN: 2.412–2.472 GHz



5 GHz WLAN: 5.180–5.825 GHz



BT: 2.402–2.480 GHz

Transmission Data

Rates



802.11b: 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps



802.11a/g: 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps,

48 Mbps, 54 Mbps



802.11n: HT20 (MCS0-7), HT40 (MCS0-7)



802.11ac: VHT20 (MCS0-8), VHT40 (MCS0-9), VHT80 (MCS0-9)



802.11ax: HE20 (MCS0-11), HE40 (MCS0-11), HE80 (MCS0-11)

Summary of Contents for AF50T
























































Search results

Summary of Contents for AF50T

Reviews:

Related manuals for AF50T

Brands by name

Popular brands

Quectel AF50T, Hardware Design

Search results

Summary of Contents for AF50T

Reviews:

Related manuals for AF50T

Brands by name

Popular brands