Cable Replacement
100-8006-152G AirborneDirect™
Serial Bridge User’s Guide
Page 81
Quatech, Inc. Confidential
INFRASTRUCTURE NETWORK CONSIDERATIONS
If you want to use Infrastructure mode, there are a couple of modifications:
•
The SSID must match the AP you want to you (step 1 in Table 14& Table 15)
•
Leave the network type as Infrastructure (step 2 in Table 14& Table 15).
If you are using static IP addresses no further changes are required to the set-up. If not, you will
need to do a couple of things:
•
Enable DHCP (default).
•
Find out the IP address assigned to the slave unit by the DHCP server. To do this you
can look at the wireless routers attached devices table, search for the device using the
Airborne Control Center (ACC) or guess (if the device has been on the network before in
all likelihood the DHCP server has assigned it the same IP address).
Once you have found the IP address this needs to be used in the Primary LAN Server IP field
(step 7 in Table 15).
Again as long as the Slave is on and associated with the AP, the devices will establish a TCP/IP
connection and bridge data between the serial ports.
