Airborne Control Center
Page 50
AirborneDirect™ Serial Bridge User’s Guide
100-8006-152G
Quatech, Inc. Confidential
Table 9. Network Services Configuration Settings
Parameter
Description
Enable UDAP
When
checked
, enables Universal Data Appliance
Protocol (UDAP). This allows the Bridge to be
discovered from a LAN-based device that supports
the UDAP protocol.
Default is
checked
.
Telnet Port
Port number of the Telnet server.
Default is
23
.
Telnet Inactivity Timeout – seconds
Number of seconds of inactivity that must occur for
the Telnet session to timeout.
Default is
60
.
Serial Escape Mode
Determines whether the Bridge looks for the escape
sequence in the data stream from the serial host and
reacts to it.
Default is
On
.
LAN Escape Mode
Determines whether the Bridge looks for the escape
sequence in the data stream from a LAN-based
device and reacts to it.
Default is
On
.
Escape Sequence
Defines the characters used as the escape
sequence.
