manualshive.com logo in svg

Quatech AirborneDirect ABDB-SE Series, User Manual

Share
Download
Quatech AirborneDirect ABDB-SE Series User Manual Download Page 13

Introduction

  

 

100-8006-152G AirborneDirect™ 

Serial Bridge User’s Guide 

Page 7 

Quatech, Inc. Confidential 

 

RELATED DOCUMENTATION 

In addition to this guide, the following documents are provided on the CD supplied with the 
AirborneDirect™ Serial Bridge: 
 

ƒ

  AirborneDirect™  Serial Bridge Quick Start Guide. 

ƒ

  Command Line Interface (CLI) Reference Guide. 

ƒ

  Airborne™ VCOM User’s Guide. 

ƒ

  Airborne™ VCOM Utility Quick Start Guide. 

ƒ

  Product Briefs and Application Notes. 

 
These documents are provided as Portable Document Format (PDF) files. To read them, you 
need Adobe

®

 Acrobat

®

 Reader

®

 4.0.5 or higher. For your convenience, Adobe Reader is 

provided on the Evaluation Kit CD. For the latest version of Adobe Acrobat Reader, go to the 
Adobe Web site: 

www.adobe.com

. 

 
Additional literature about AirborneDirect™ products and the Airborne WLN Module that powers 
them, such as application notes, product briefs, and white papers, can be found on the Quatech 
site: 

www.quatech.com

. 

 
Quatech also offers developer documentation for its AirborneDirect™ products. Please contact 
Quatech for more information. 
 
 

Summary of Contents for AirborneDirect ABDB-SE Series














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands