Using VCOM
Page 70
AirborneDirect™ Serial Bridge User’s Guide
100-8006-152G
Quatech, Inc. Confidential
MODIFYING VIRTUAL COM PORT PARAMETERS
To select virtual COM port parameters, use the following procedure:
•
In
the
VCOM List
pane, click the virtual COM port whose parameters you want to
change. The right side of the window displays the current parameters for the virtual COM
Port you selected.
Using the parameter controls on the right side of the window, select the desired settings for the
selected virtual COM port (see Table 11 on page 69).
Note:
When modifying virtual COM port parameters, the parameters
VCOM Port
and
Port Type
become read-only fields and cannot be changed.
•
Click
the
Save
button. If you changed the VCOM Settings, the message in Figure 41
appears.
Figure 41. Reboot Message
•
Click
the
OK
button.
•
Reboot your computer to have your VCOM settings take effect.
DELETING VIRTUAL COM PORTS
If you no longer need a virtual COM port, use the following procedure to delete it:
Note:
A precautionary message does not appear before you delete a virtual COM
port. Therefore, be sure you no longer need a virtual COM port before you
delete it. If you delete a virtual COM port that you need, use the procedure
on page 68 to add it again.
•
In
the
VCOM List
pane, click the virtual COM port you want to delete.
•
Under
the
VCOM List
pane, click the
Delete
button. The selected virtual COM port is
deleted from the pane.
•
To delete additional virtual COM ports, repeat steps 1 and 2.
