CUST
OMIZING CABINET
APPEARANCE
7
75
7.1 Changing The Marquee
The top backlight graphic is a translucent vinyl film between two clear acrylic panels. To
change the graphic you must remove the acrylic panel from the marquee header.
7. CUSTOMIZING THE APPEARANCE
The Game Gate™ VU has a modular graphic system “Quikskin”, which allows for the side
panels, marquee, and control panel to easily be updated to promote a specific game title. In
addition, the control panel has a slot to display the retail game case, which communicates the
game rating.
Fig. 7.1A
Fig. 7.1B
Fig.
7.1C
2
1
3
Use a screwdriver to remove the 5
screws shown. Do not try to remove
the screw in the top center.
Open the back door and disconnect the
green/yellow cable at the connector as
shown.
Remove the panel, slide the acrylic out. The graphic is pressed between two sheets.
Remove the edge channel to separate the acrylic. Update the graphic and reverse
the steps to reinstall the metal bracket and reconnect the green/yellow wire.
Summary of Contents for GAME GATE VU
Page 1: ...TM MODEL OWNER S MANUAL...
Page 2: ......
Page 101: ...This page is intentionally left blank...
Page 102: ...Extra bill accpetor scan sheets...