quasimoto GAME GATE VU, Owner'S Manual

Page: 32 / 106

SETUP
INSTRUCTIONS
3
24
3.5 Setting Master Volume and Bass
Game Gate™ VU has several volume settings that are adjusted by the software, for example
the volume level in the attract mode versus the volume level during play mode (see Section
6.1). However, the settings in the software are only relative to the master volume level, which
is set using the dials on the volume control module, which is located behind the top coin door.
Open the top coin door to access the module (see Fig 2.7D). Adjust the volume to your pref-
erence using the dials.
3.6 Installing a Bill Acceptor
Quasimoto recommends MEI’s AE2600 upstacking bill validator. The
2400 series may also be used, but function may be limited for bills higher
than $5. Please check to make sure the acceptor can read the newer
style bills. For details please visit MEI’s website at www.meigroup.com
Remove the metal blanking plate from the upper door. Use a wrench to remove the 4
nuts.
Insert the bill acceptor body into the opening. Reinstall the 4 nuts and tighten with
wrench
If the bill acceptor is a 110VAC version, and you are in 110VAC area, plug the BA into
an available outlet on the inside of the cabinet.
1
2
3
Fig 3.6A