quasimoto GAME GATE VU, Owner'S Manual, Page: 99 / 106

WIRE DIAGRAMS
12
91
7. VGA Port
- a DB15-pin female connector for video output that is not used with this applica-
tion.
8. HDMI Port
- a video output that is not used with this application.
9. Audio in/out
- the only connector used with the Game Gate application is the stereo audio
line out (green connector), which outputs the audio to the timerboard. Other connectors, such
as SPDIF are not used.
10. DIMM1, DIMM2
- Game Gate uses one 512mb SO-DIMM 200pin 800mHz memory in
DIMM1 slot. DIMM2 is not used with this application.
11. JPW1 Power input connector
12. ATX1
- 20 pin connector, standard ATX computer power input coding.
13. IDE81 - Game Gate™ connects a 4GB compact flash card to the motherboard via an IDE
ribbon cable and an IDE to compact flash converter, which effectively acts as the hard drive
for the machine.
14. JLPT1
- a parallel port, not used with this application.
15. CON1
- Mini PCI-E slot, not used with this application.
16. SATA
- Serial ATA connectors used for high speed data rates, designed to connect to
SATA compatible hard disks. Game Gate™ does not use SATA hard drives so these connec-
tors are not used with this application.
17. I2C Bus Connector
- used for users that connect SMBus interface, however this is not
used with this application.
18. JCASE1
- Not used with this application.
19. J3 - this jumper is used to specify the operation voltage of the LVDS interfaced flat panel,
which is not used with this application.
20. LVDS Flat Panel Connector: JLVDS1
- The LVDS (Low Voltage Differential Signal)
connector provides a digital interface typically used with flat panels. This feature is not used
in the Game Gate™ application, rather the component video output is used to achieve video
signal with the 32” LCD in the system.
21. JAUD1 - this is an amplified audio output connector (left spk, left ground, right spk, right
ground) that is not used with this application.
22. PCI (Peripheral Component Interconnect) Slot - supports LAN card, SCSI, USB card, and
other add-on cards that comply with PCI specifications, however this connector is not used
with the Game Gate™ application
23. J1,J2
- these jumpers specify th operation voltage of the onboard serial ports, and are not
to be adjusted for the Game Gate application.
24. JTV1, TV-Out Connector -
the mainboard output for component video, which is connect-
ed to the timerboard for video control, which is then passed to the 32” LCD display.