quasimoto GAME GATE VU, Owner'S Manual, Page: 4 / 106

•
Power down and disconnect the power prior to working on the product.
To avoid electrical shock, it is important to power off the product and disconnect from the power
source in all instances where the work requires direct contact with the interior of the product. In
the instances that the work requires a power-on status, the manual will clearly state it.
•
Connect the Ground Terminal.
(This step may be eliminated in instances where the product uses a power cord with a
ground connection.)
This product contains a Ground Terminal. During installation, it is important to securely connect
the Ground Terminal with the proper indoor ground terminal through the use of a grounded cable.
If the product is not properly grounded, the user is exposed to potentially hazardous electrical
shock. After every instance of performing work, ensure that the Ground Terminal is once again
securely connected.
•
Use specified fuses
(Only for products that use fuses.)
Using fuses that exceed the required rating may cause fire and electric shock.
•
Specification changes (including but not limited to equipment relocation, conversion,
and addition
) not designated by the manufacturer, Quasimoto Interactive, Inc., are not permitted.
All parts of the product, including safety warning labels, should not be removed. It is hazardous to
operate the product after removing parts and/or modifying the circuits. In the event that any doors,
covers, lids, and/or protective parts are damaged or lost, immediately cease product operation.
Promptly contact the distributor from which the product was purchased for a replacement compo-
nent. Quasimoto Interactive, Inc. shall not be held responsible for any accidents or compensation
for damage to a third party that are the result of product specifications not designated by Quasimo
-
to Interactive, Inc.
•
Make sure the product meets the correct Electrical Specifications
Prior to installing the product, check for Electrical Specifications. Quasimoto Interactive, Inc. prod
-
ucts are labeled with an Electrical Specifications description. Make sure that the product is com
-
patible with the power supply voltage and frequency requirements of the location. Any variance on
the Electrical Specifications at the location from those contained on the product’s description label
may cause a fire and/or an electric shock.
•
Use suitable lighting during installation and operation of the product.
Warning labels must be able to be clearly read. To ensure safety, labels and printed instructions
cautioning against possible hazardous circumstances are affixed to places on the product where
accidents can occur. It is important that the product is operated in a location where suitable light-
ing is available allowing the labels to be clearly read. In the instance that a label is peeling off or
removed in part or whole from the machine, immediately attach the label or replace it with a new
label. Promptly contact the distributor from which the product was purchased for a replacement
label.
•
Use care when handling the monitor.
Even after powering down a monitor, some of the monitor components are subject to high voltage.
Monitor repair and replacement should be carried out by knowledgeable technical personnel with
experience in dealing with electricity.
•
Monitor adjustments
Adjust the monitor to eliminate any on-screen flickering or distortion. Operating the product with
a monitor that has not been correctly adjusted may cause dizziness, headache, and/or nausea to
the operator and users.