background image

StorNext AEL500 Mini Archive Essentials Guide

6-67853-02

October 2014

Introduction

3

Introduction

StorNext AEL Archives are purpose-built for Big Data, offering high-

performance, highly scalable data management solutions that are also cost-

effective and easy to manage. When added to a StorNext file system 

deployment, StorNext AEL Archives provide nearline archiving with built-in data 

protection and self-healing capabilities to ensure that valuable Big Data is 

protected and accessible over time.
The 

StorNext AEL500 Mini Archive Essentials Guide

 provides an overview of the 

steps required to unpack, set up, and install the StorNext AEL500 Mini 

Archive.The StorNext AEL500 Mini Archive is a unified archiving solution for 

StorNext file systems, combining archive software and hardware. The StorNext 

AEL500 Mini Archive hardware is a 5U Scalar i500 which supports an optional 

EDLM Hardware Add-On Kit, to provide EDLM functionality, and StorNext 

AEL500 capacity upgrades to increase storage. See 

Install the StorNext AEL500 

Mini Archive EDLM Hardware Add-On Kit

 on page 11 an

Install the Storage 

Expansion Licenses

 on page 14.

The StorNext AEL500 Mini Archive contains the following components:

• 20 licensed storage slots in the Scalar i500
• 1 License for 20 StorNext Storage Manager Slots
• 1 EDLM license 

For detailed information on configuring and running your archive, adding, 

removing, replacing parts, and Scalar i500 software, see 

 

http://www.quantum.com/ServiceandSupport/

SoftwareandDocumentationDownloads/SI500/Index.aspx

For detailed information on your using your StorNext system and software, see

 

http://www.quantum.com/ServiceandSupport/

SoftwareandDocumentationDownloads/SNMS/Index.aspx

Release Notes are also available for this product. The Release Notes describe 

changes to your system or firmware since the last release, provide compatibility 

information, and discuss any known issues. The Release Notes can be found at 

http://www.quantum.com/ServiceandSupport/

SoftwareandDocumentationDownloads/AEL500/Index.aspx

Note:

In this document, the term “archive” is synonymous with “library”.

Note:

Before operating this product, read all instructions and warnings in this 

document and in the 

System, Safety, and Regulatory Information 

Guide

. In addition, be sure to use this document in conjunction with 

the 

Scalar i500 User’s Guide

.

Summary of Contents for StorNext AEL500

















Reviews: