background image

FCC Compliance Statement

70

ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual

Safety (Low 
Voltage Directive)

3

This device complies with the following standards in accordance with 

European Directives 73/23/EEC.
• EN 60950:2000
These definitions are classifed as per safety standard:
• EN 60950:2000
• SELV: Safety Extra Low Voltage

FCC Compliance Statement

3

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 subpart B of the FCC rules. 

These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio 

communications.
Any changes or modifications made to this equipment may void the 

user’s authority to operate this equipment.
Operation of this equipment in a residential area may cause interference 

in which case the user at his own expense will be required to take 

whatever measures may be required to correct the interference.
This device complies with Part 15 subpart B of the FCC Rules. Operation 

is subject to the following conditions:
• This device may not cause harmful interference, and
• This  device  must  accept any interference received, including 

interference that may cause undesired operations.

Summary of Contents for Quantum ValueLoader



























































































Reviews: