ValueLoader Administration
Retrieving Information About the ValueLoader
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
43
Firmware Revision
3
This option displays the revision of the firmware currently installed in
the ValueLoader.
To use this option:
1
From the Home Screen or main menu, press the
[+]
or
[-]
button until
Information
appears on the top line of the LCD screen, and then press
the
[Enter]
button to access the available options.
2
Press the
[+]
or
[-]
button until
Firmware Rev
appears on the LCD
screen.
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.
3
Press the
[Cancel]
button when finished.
Note:
The tape drive and ValueLoader firmware are a single image,
but the image displays as three firmware numbers on the front
panel,
Drive SCSI Controller
,
Robotics Controller Firmware
, and
Robotics SCSI Controller Firmware
.
Note:
After a firmware update, the firmware revision displayed
on the LCD may not be updated until the ValueLoader is
power cycled.
Summary of Contents for Quantum ValueLoader
