Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
34
Installing the Library
Table 4 Setting Up the
Cabinet
Setting the Date and Time
0
To set the date and time:
1
From the
Setup
screen, use the up and down arrows to highlight
Date and
Time
and press
Enter
.
The
Date and Time
screen displays (see
figure 29
):
Figure 29 Date and Time
Screen
The
Date and Time
screen displays the following information about the
library:
2
Use the up and down arrows to view or edit the date and time
information. Press
Enter
to accept the new settings.
3
When you are finished viewing/editing the date and time information,
press
Exit
to return to the
Setup
screen.
Cabinet Options
Description
Host bus
Sets the SCSI ID for both the library
and tape drives.
Stack role
Assigns the library stack role as
Master, Slave, or Stand alone. There
can be only one Master library in a
multiple stack. Once configured as a
slave, all library OCP functions can be
controlled via the Master library OCP.
The library model number will also
change to PX500S indicating a stacked
library configuration. The library
model number is available from the
home screen on the Master library
OCP.
Left load port
Enables or disables the left load port
Right load port
Enables or disables the right load port
Auto inventory
Enables or disables the auto inventory
function. When enabled, the library
automatically inventories the library
contents when going “On-line”.