![background image](http://html1.mh-extra.com/html/quantum/px506/px506_unpacking-and-installation-instructions_3575824016.webp)
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
16
Installing the Library
It is important to the library installation to locate the hole pattern in the rack
rails (see
figure 11
). The library must be installed at the beginning of the hole
pattern. Refer to
table 1
for information on common rack hole types.
Table 1 Rack Hole Types
Figure
Description
Square rack holes are the most common type of rack
holes. They can accept either cage nuts which mount
from the back of the rail or clip nuts which clip on from
the side of the rack rail.
Through holes require clip nuts to accept mounting
hardware.
Threaded holes require neither cage or clip nuts to
accept mounting hardware.
Note:
The rails within the rack have a hole pattern that repeats
throughout the rail. X marks the screw positions. Install nut clips
(included in the accessory kit) on the rails if necessary.
Cage nut
Clip nut
Clip nut