Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
14
Removing the Remaining Packing Materials
5
To remove the robotics restraints (see
figure 8
):
a
Disconnect the two velcro straps securing the robotics restraints to
the library chassis.
b
Pull the straps away from the chassis anchors and remove the straps
from the library.
c
Lift the left robotics restraint slightly up and remove it from the
library.
d
Slide the right robotics restraint to the right until you are clear of the
robotics motor and remove the restraint from the library.
Figure 8 Removing the
Robotics Restraints
Caution:
Avoid touching the printed circuit board and ribbon cable
connectors on the robotic hand.
Note:
Save the robotics restraints for later shipping or relocation of
the library.
PX506 shown
Velcro straps
Robotics
restraints
PX506 shown
Right door
Left door
Right door