![background image](http://html1.mh-extra.com/html/quantum/px506/px506_unpacking-and-installation-instructions_3575824024.webp)
Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
24
Installing the Library
Table 3 Back Mounting
Bracket Orientation
Once the location is determined, attach the back brackets to each side of the
library with four M5 x 8 Allen screws (see
figure 16
for the PX506 and
figure 17
for the PX510).
Rack Depth
Mounting Position
> 27 to 28 in.
Use holes A and C
> 28 to 29 in.
Use holes B and D
> 29 to 30 in.
Use holes A and C
> 30 to 31 in.
Use holes B and D
> 31 to 32 in.
Use holes C and E
> 32 to 33 in.
Use holes D and F
> 33 to 34 in.
Use holes E and G
> 34 to 35 in.
Use holes F and H
> 35 to 36 in.
Use holes G and I
Note:
Use the shortest depth number. For example, if the measurement
is 34 in., use holes E and G.
Note:
If this is a multiple stack configuration, refer to
Installing
Additional Libraries
on page 35 for information on preparing the
library chassis for passing tape cartridges from one unit to another.