![background image](http://html2.mh-extra.com/html/quantum/p4000-series/p4000-series_user-manual_3854919139.webp)
Appendix C Automatic Drive Cleaning
Reporting of Cleaning Mode
Quantum P4000 and P7000 Libraries User’s Guide
119
GUI
3
To change automatic cleaning mode from the touch screen GUI, select
Configuration/Auto Clean
:
•
Enable
- turns automatic cleaning mode on
•
Disable
- turns automatic cleaning mode off
Mode Select
Command
3
To change the automatic cleaning mode using the Mode Select command
set the Vendor Unique Page (20h) byte 2, bit 1 (AC) to:
• One - enable automatic cleaning
• Zero - disable automatic cleaning
To save the automatic drive cleaning mode setting in NVRAM set the
Mode Select command Save Page (SP) bit to one.
When the automatic drive cleaning mode setting is saved in NVRAM,
neither a SCSI bus reset or a power cycle of the Product Name will change
the mode setting.
Reporting of Cleaning Mode
3
The current drive cleaning mode can be reported by:
•
•
Diagnostic
Software
3
To display the current drive cleaning mode from diagnostic software
select:
•
Config/Report Clean Tape
The diagnostic screen displays:
• The current cleaning mode
• The bar code label of each cleaning cartridge
• The number of uses of each cleaning cartridge
• The “home” storage element of each cleaning cartridge