![background image](http://html2.mh-extra.com/html/quantum/p4000-series/p4000-series_user-manual_3854919113.webp)
Chapter 6 Troubleshooting
Common Problems and Solutions
Quantum P4000 and P7000 Libraries User’s Guide
93
GUI Problems
6
describes corrective actions for GUI problems.
Table 19 GUI
Problems
Robotics
Problems
6
describes corrective actions for robotics problems.
Table 20 Robotics
Problems
Problem
Corrective Action
The GUI is blank.
Confirm that power is on, then contact an
authorized field service engineer.
The GUI does not
respond to touch.
Contact an authorized field service engineer.
An error message
is displayed.
Write down the details of the error message,
including the SK, ASC, and ASCQ numeric
values.
Press Okay to clear the message.
Problem
Corrective Action
The robot does not
move at power up.
Make sure that all internal packing materials
(foam pads and tie wraps) have been removed.
Check the
Stop
and
Standby
buttons; make sure
the library is on-line and the
Stop
button is
disabled.
The gripper
partially grips a
tape cartridge.
Issue a
Move Cartridge
command to move the
cartridge from the gripper to an empty storage
bin.
The barcode reader
on the gripper
fails.
Verify that nothing obstructs the reader.
Then, restart the library. If the problem
continues, contact a field service engineer.