Appendix B Relocating the Library
Preparing the Library for Relocation
108
Quantum P4000 and P7000 Libraries User’s Guide
g
Install the screw that secures the vertical carriage restraint to the
vertical carriage assembly.
h
Remove the tie wrap or clamp from the vertical belt and gently
lower the vertical carriage.
5
Install the horizontal carriage restraint (see
):
a
Move the vertical carriage assembly to the right hand end of the
horizontal axis.
b
Place the horizontal carriage restraint and install the screw that
secures it to the floor of the library.
c
Install the two screws that secure the horizontal carriage restraint
to the horizontal carriage assembly.
Figure 55 Installing
the Horizontal
Carriage Restraint
6
Install the gripper restraint:
a
Slide the gripper assembly away from the vertical axis until the
gripper assembly is fully extended and the gripper restraint
disengages from the follower guide.
b
Pivot the gripper restraint into place until it interlocks with the
motor, spring post, and follower guide (see
gripper restraint should now be parallel to the follower guide.
Horizontal
carriage
restraint
