Quantum MC300 Prism, User Manual

Page: 27 / 140

Chapter 2 PMC Server Management
Network Configuration Page
MC300 Prism Management Card User’s Guide 11
Table 3 Network
Configuration Fields
3
Click
Apply
.
The PMC will not use the new configuration until it is rebooted
(see Rebooting the PMC and Library on page 19).
Field Description
Use DHCP
Select
Use DHCP
if your network utilizes
DHCP for dynamic IP addressing. In the
event a DHCP server is unavailable, the other
fields will apply. The default value is
Enabled
.
Hostname
View or set the hostname for the PMC, for
example, the DNS name. The default value is
PMC300-[MAC address]
. When entering a
hostname, no spaces are allowed.
Underscores are acceptable.
Domain View or set the domain for the PMC, for
example,
quantum.com
is the domain for
Quantum Corporation. The default value is
the
[local domain]
.
IP Address View or set the IP address for the PMC. The
default IP address is
192.168.1.1
.
Subnet Mask
View or set the subnet mask for the PMC. The
default subnet mask is
255.255.255.0
.
Default Gateway View or set the default gateway for the PMC.
The default value is
[default for your gateway
or blank]
. Change the value only as required
by your network.