Quantum MC300 Prism, User Manual, Page: 120 / 140

Appendix A Event Details Listing
104 MC300 Prism Management Card User’s Guide
2101 Hardware Failure Timed out waiting for I2C bus to go not busy
2102 Hardware Failure No acknowledge received from slave
2103 Hardware Failure Exceeded retry limit while trying to send message
2105 Hardware Failure Message received from I2C bus but destination is unknown
2106 Hardware Failure Message to send over I2C bus is too large (see path)
2107 Hardware Failure Message received over I2C bus is too large
2108 Hardware Failure I2C mailbox is full
2109 Hardware Failure Receiver address in I2C message incorrect
210A Hardware Failure Pending interrupt status not reset
2200 Hardware Failure UI task init failed
2201 Hardware Failure UI queue full
2202 Hardware Failure The UI is not in the correct state to perform the requested action
2301 Hardware Failure Timed out waiting for data from barcode reader
2302 Hardware Failure Did not detect barcode reader
2400 Hardware Failure Librarian task init failed
2401 Hardware Failure Librarian task received an unknown or unexpected message
2402 Hardware Failure Librarian queue full
2406 Hardware Failure Servo initialization not complete. Librarian unsure of servo
status.
2407 Hardware Failure Servo turned off due to failure. Librarian unsure of servo status.
2416 Hardware Failure Bad parameter in Librarian message
2500 Hardware Failure SCSI task init failed
FSC
Code
E-mail Message
Error Type
Description