Quantum MC300 Prism, User Manual, Page: 34 / 140

Chapter 2 PMC Server Management
Utilities Page
18 MC300 Prism Management Card User’s Guide
2
Under
Upload New Software Image
, type the location and file
name of the new software image.
3
Click
Upload
to place the new software image in a temporary
area of the system for PMC images only.
A new window displays with a progress bar indicating the
activity of the upload. When complete, a
Results
page displays
indicating the software has been uploaded.
4
Click
OK
to return to the
Utilities
page.
The PMC system will use the new software image after
completing the
Activate the New Software Image
and rebooting
the PMC (see Rebooting the PMC and Library ).
Activating a New
Software Image
2
To move the uploaded software image from the temporary area,
replace the current software image, and activate the new software
image:
Note:
Use the
Browse
button to browse the system and
locate the new software image. The file name for the
new software image begins with
PMC300
and ends
with
.
image
, for example:
PMC300.[version].[build].image
. Do not
interrupt the upload process.
If the PMC does not recognize the new software
image file as a valid software image, the transfer
aborts.
Note:
If you reboot the library before activating the
uploaded software image, the image file is erased
and the upload process must be performed again.
Note:
The user does not require access to
Activate New
Software Image
.