Quantum MC300 Prism, User Manual, Page: 121 / 140

Appendix A Event Details Listing
MC300 Prism Management Card User’s Guide 105
2501 Soft Error SCSI task received a bad message
2502 Hardware Failure SCSI queue full
2503 Hardware Failure FAS366 not detected
2600 Hardware Failure Servo task init failed
2601 Hardware Failure Servo queue full
2602 Hardware Failure The X axis failed to get to its target position
2603 Hardware Failure The Y axis failed to get to its target position
2604 Hardware Failure The Theta axis failed to get to its target position
2605 Hardware Failure The hand axis failed to get to its target position
2606 Hardware Failure The elevator axis failed to get to its target position
2607 Hardware Failure The Z axis failed to get to its target location
2608 Hardware Failure The X axis tacho counter failed to clear at power-on
2609 Hardware Failure The Y axis tacho counter failed to clear at power-on
260A Hardware Failure The Theta axis tacho counter failed to clear at power-on
260B Hardware Failure The hand axis tacho counter failed to clear at power-on
260C Hardware Failure The elevator axis tacho counter failed to clear at power-on
260D Hardware Failure The Z axis tacho counter failed to clear at power-on
260E Hardware Failure The hand could not be returned to the XY center during power-
on
260F Hardware Failure The servo task has received an invalid command code
2610 Hardware Failure The hand action ‘completed’ with no cartridge detected in the
hand
FSC
Code
E-mail Message
Error Type
Description