Quantum MC300 Prism, User Manual

Page: 61 / 140

Chapter 5 ALERT Library Management
Library Status
MC300 Prism Management Card User’s Guide 45
Table 10 Element
Information Fields
Field Description
Address
Displays the hexadecimal address of the element
Barcode
If a cartridge is present in the element and has a
barcode, the barcode label displays. If a cartridge is
present in the element and does not have a barcode,
the message
(Barcode?)
appears. If no cartridge is
present in the element, the field is blank.
Type
Displays the element being viewed
BUS ID
This field displays the BUS ID of the element being
viewed. (For SCSI devices, the BUS ID is the unique
target ID of the device. For Fibre Channel devices,
the BUS ID is the unique Loop ID of the device or
“Soft” to indicate soft addressing mode.)
Interface Type
This field displays the element connection type
(whether SCSI or Fibre Channel)
Serial Number
Displays the serial number of the selected tape drive
Model
Displays the tape drive type, such as
DLT8000
Revision
Displays the firmware revision number
Cleaning
Needed
Displays
Yes
if the tape drive is in need of cleaning.
This informational message permits you to schedule
the drive cleaning. If the condition is allowed to
persist, the drive eventually moves to the
Cleaning
Required
state and the drive will not function until
cleaning is performed.
Cleaning Tape
Expired
Displays
Yes
if the cleaning cartridge has expired
Cleaning
Required
Displays
Yes
if cleaning is required. The tape drive
will not function until cleaning is performed.
Hardware Error
Displays
Yes
for a hardware error, default is
No
Load Complete
If the tape load is complete, displays
Yes
, default is
No