![background image](http://html1.mh-extra.com/html/quantum/dlttape-sdlt-220/dlttape-sdlt-220_user-manual_3661393065.webp)
SDLT 220 and SDLT 320 Product Manual
CHAPTER 4: Installing Your Tape Drive
81-85002-01
March 2004
4-13
2.
Using four #6-32 UNC-2B screws, secure the tape drive in the bay or chassis.
Figure 4-5.
Internal Drive Mounting Locations – Side and Bottom Views
Connecting the Internal Drive Cables
The three connectors on the back of the internal SDLT drive that are discussed in
this section are: 1) SCSI, 2) power, and 3) optional library/loader connectors. For
the tabletop model, typical connectors (power cords) are shown in
Figure 4-8 on
page 4-24
.
SCSI and Power Connectors
Figure 4-6 on page 4-15
shows the pin orientation for the 68-pin SCSI connector
and 4-pin power connector located on the back of the internal tape drive.
Summary of Contents for DLTtape SDLT 220
