APPENDIX B: DLTtape IV Data Cartridge
SDLT 220 and SDLT 320 Product Manual
B-4
March 2004
81-85002-01
Follow these steps to visually inspect a DLT cartridge:
1.
Remove the data cartridge from its protective plastic case.
2.
Look at the data cartridge to check for any obvious cracks or other physical
damage. Look for broken or missing parts.
3.
Gently shake the data cartridge. Listen for any rattling or sounds of any loose
pieces inside the cartridge. If you hear anything loose inside, do not use the
cartridge.
4.
Look at the end of the data cartridge, holding it as shown in
Figure B-1
; now
look at the bottom of the data cartridge, holding it as shown in
Figure B-2
.
Figure B-1.
End View of DLT Data Cartridge
Check the reel lock openings and ensure that the small plastic tabs inside are
partially visible. Like any plastic part, the reel locks can break if the cartridge
is dropped. If the reel lock tabs are not visible, do not use the cartridge.
Figure B-2.
Bottom View of DLT Data Cartridge
5.
Also located on the bottom of the data cartridge is the spring-loaded hub.
Verify that the hub is centered within the circular opening in the data
Note: Cartridge door not shown, for clarity
Summary of Contents for DLTtape SDLT 220
