SDLT 220 and SDLT 320 Product Manual
APPENDIX B: DLTtape IV Data Cartridge
81-85002-01
March 2004
B-9
N
OTE
: For more details about specific SCSI commands and sense
codes, refer to a separate document published by
Quantum, SDLT 220 and SDLT 320 SCSI Interface Guide,
81-85001-01.
B.5 Unloading a Data Cartridge
Complete this subsection to unload a data cartridge; refer to
Figure B-7 on
page B-8
as needed.
1.
Press the Eject button (or issue an appropriate system software command); the
drive completes any active writing of data to the tape. The Drive Status LED
blinks as the tape rewinds.
When the tape is finished rewinding, the drive ejects the cartridge and the
Drive Status LED lights steadily.
2.
Remove the cartridge from the drive and return the cartridge to its plastic case
to protect the cartridge from damage.
C
AUTION
: Remove the data cartridge from the tape drive BEFORE
turning off host power. Failure to remove a data cartridge
may result in cartridge or tape drive damage.
Do NOT rush removal of the data cartridge: premature
removal can cause tape leader failure. Wait until the drive
ejects the cartridge and the Drive Status LED lights
steadily before removing the cartridge.
Summary of Contents for DLTtape SDLT 220
