![background image](http://html1.mh-extra.com/html/quantum/dlttape-sdlt-220/dlttape-sdlt-220_user-manual_3661393061.webp)
SDLT 220 and SDLT 320 Product Manual
CHAPTER 4: Installing Your Tape Drive
81-85002-01
March 2004
4-9
Figure 4-2.
Connectors on the Back Panel
Figure 4-3.
Back Panel Connector Locations (Drawn to Scale)
Controller Diag Port (8 pin)
(Diagnostic use only)
Configuration Jumper
(Omit jumper on Pins 1-2
to enable wide SCSI)
SCSI ID Jumper Block
(No jumpers on this block =
default SCSI ID of 5)
TERMPWR Block
(Install jumper on Pins 1-2
to enable TERMPWR)
SCSI Port
(68 pin)
Denotes Pin 1 orientation
Pin 1
Power Connector
(4 pin)
Loader Connector
RS-422 (8 pin)
* Figure not drawn to scale
Summary of Contents for DLTtape SDLT 220
